Origin	China
Brand Name	aubi

All-Steel Wall Bench

Dimension: Wall Bench: L*750*850mm

Worktop: 12.7mm Phenolic Resin sepcialized used in laboratory, edge double layers upset, acid and alkali resistant, corrosion-proof. Technical details: bending strength≥259MPa; tensile strength≥113Mpa, compression strength≥152Mpa(vertical) and ≥147Mpa(horizon); Rockwell hardness≥69; water absorption≥0.71%; corrosion-proof; acid and alkali resistant for 24 hours one day. Density≥1.4g/cm3.

Frame: All-Steel, cabinet body is made of 1.0mm cold-rolled steel modes jointless, the process including clipping, fluting, bending molding and so on, then assembly fixture. The whole process are adopted with precision equipment. All the outer welding line are thoroughly polishing process, smooth and non-hurt hand. Front and after colume is fixed inner and with reinforcing steel bar in order to enhance the bearing-weight and bounce impact for the cabinet body.

Cabinet Body: all the accessories are made of cold-rolled steel with different thickness according to different bearing weight, cold-rolled, folded, welded, polished, acid cleaned, phosphoresced and coated with off-white expoy powder, elegant appearance, need to install reinforce bar in some special point, its’ bearing capacity and bounce impact force reach to the requestment for a laboratory.

Door panel, draw panel: inside and outside two-layer structure. Draw is made of cold-rolled bended and shaped, bracket weight-bearing. Seal plate is bended then connected to draw outside panel by self drilling screws. Harmonious entity and elegant appreance.

Base plate for cabinet body: cold-rolled steel is bended and shaped, install reinforce bar inside in order to strength its weight-bearing and prevent layer-panel deformation.

Handle: inner handle or alloy-matt handle according to customer’s request, fasionable and elegant in style and humanist design style. Cabinet body without intermediate arbor support can be full opened, the integrated shaped movable layer-plate adjustable system is installed inside the cabinet body. The movable plywood can be adjustbale continuous and by step.

Door header: with ball catch, bumper which can clamp door panel in order to prevent noisy from collision and abrasion the coated when closing the door and draw.

Movable back plane: movable, lifting and pulling freely dimantling structure, easy to overhaul the water, electric and gas pipe when using.

Movable plywood: install reinforce bar inside in order to strength its weight-bearing and prevent layer-panel deformation, with steel plywood consignment, freely dimantling and adjustable according to your request.

Hinge: 175°wide-opened hinge with rust-proof, noiseproof, unrebound, best strength, uneasy-breaking and long-lasting life advantage.

Slide rail: high-quality mute slide rail, fully open the draw, weight-bearing and non-deformaing. No noisy for regular open and close, stocky and stable, non-deforming.

Consignment: freely dimantling, continuously and by-steply adjustable.

Bumper: prevent noisy from collision and abrasion the coated when closing the door and draw

PP Sink: 5mm black ,acid and alkali resistant, jointless and with a professional launching way that is deodorize and prevent reflux.

Faucet: copper matix, ceramic disc and coated with epoxy resin.

Socket: national standard 10A multifunctional electric outlet.

Reagent shelf: aluminium alloy as the main frame, two layers which are made of 10mm tempered safety glass and each side with one stainless steel guardrails, the distance between the two layers can be adjusted. In order to make the fix and maintain the water, electric and gas system for conveniently, there is a service box under the layer which can be used for the water tube, electric wire and gas tube.

Dry rack: PP stick and Phenolic Resin, chemical corrosion resistant, easy-clean and damp-proof, there is a antomatic reflux device, diversion hole connected to sink, convenient for residual water drainage and vessel dry naturally, elegant appreance and utility.